Challenger 2-Post Lifts
Challenger CL10V3
By far the most popular Commercial Grade 2-Post lift we sell, the iconic Challenger CL10 is the #1 go to for commercial automotive service garages. Made at the Challenger factory in Kentucky, the Challenger CL10 is a robust workhorse that will exceed the ROI expectations for your business’ equipment purchases. Larger diameter cable sheaves, larger diameter cables, Versymmetic arm design, commercial grade power unit, commercial grade hydraulic pistons, and quality construction are just a few of the reasons why the Challenger CL10 is the top choice for commercial applications across the county.
Model Number | CL10V3 |
Lifting Capacity | 10,000 lbs. |
Lifting Configuration | Versymmetric (Symmetric & Asymmetric) |
Arms | 3-stage front/3-stage rear |
Rise Height | 74.125” |
Overall Height | 140” |
Overall Height (Cylinder Extended) | 143” |
2’ Height Extension Available | √ |
3’ Height Extension Available | √ |
Overall Width | 138.5” / 143” |
Drive-Thru Clearance | 100” / 104.5” |
Floor to Overhead Switch | 134.5” |
Screw Pad Height | 3.875” – 6.125” |
Inside Columns | 110” / 114.5” |
Motor / Voltage | 2HP, 208v-230v, 60Hz, 1Ph |
Speed of Rise | 38 s |
Ceiling Height Required | 11′ 11″ |
ALI/ETL Certified | √ |
Quick Cycle | – |
Dual Pendant Controls | – |
Colors Available | Red, Blue, Black |
The Challenger CL10 comes with Challenger’s Versymmetric technology that eliminates the need to choose between a Symmetric and Asymmetric lift configuration. Using the same lift you can rack the vehicle symmetrically or asymmetrically – this technology saves time and eliminates the guesswork required when planning the layout of your automotive shop.
Challenger LE10
The most popular Economy Grade 2-Post lift we sell, the Challenger LE10 is a great less expensive alternative to the CL10 for both home and commercial use. The LE10 utilizes 3-stage front and rear arms to allow the technician to lift both Symmetrically and Asymmetrically depending on the vehicle being worked on.
Model Number | LE10 |
Lifting Capacity | 10,000 lbs. |
Lifting Configuration | Symmetric & Asymmetric |
Arms | 3-stage front/2-stage rear |
Rise Height | 74.75” |
Overall Height | 143.875” |
Overall Height (Cylinder Extended) | 143.875” |
2’ Height Extension Available | √ |
Overall Width | 131.75” |
Drive-Thru Clearance | 98.375” |
Floor to Overhead Switch | 137” |
Front Arm Reach | 21.75” / 39.25” |
Rear Arm Reach | 38.75” / 55.375” |
Screw Pad Height | 4.25” / 6.75” |
Inside Columns | 110.25” |
Motor / Voltage | 2HP, 208v-230v, 60Hz, 1Ph |
Speed of Rise | 43 s |
Ceiling Height Required | 12’ |
ALI/ETL Certified | √ |
Colors Available | Red, Blue |
